Curitiba · Brazil
Elastobras

Curitiba · Brazil · Since 1995

Custom rubber and silicone components, made to your drawing

Compounded and molded in-house

Injection-molded and extruded elastomer components produced to customer drawing — seals, grommets, bushings, profiles and tubing for banking automation, beverage equipment, mining and automotive.

Request a quotation →

Founded
1995
Injection machines
16
Extrusion lines
3
Certification
ISO 9001

Product lines

Start with the line that matches your part. Every page explains what we already make and what we can develop.

Enclosure seals →

Gaskets, grommets and cable-entry seals for fibre optic closures, EV chargers and outdoor housings.

Vacuum suction cups →

Silicone and rubber cups for packaging machines, robot grippers and vacuum lifters, with bonded metal inserts.

Agro-industry →

Plucking fingers, milk pump rotors, seals and profiles for poultry, dairy and agricultural machinery.

Engineering and development →

Any rubber or silicone part from a drawing, a sample or a failure in service — including railway and electrical components.

Markets and industrial sectors

Custom-engineered rubber and silicone components molded and extruded to your drawing for sector-specific operating requirements.

Automotive, bus and truck →

Bushings, rings, mounts, seals and sleeves, produced to customer drawing for vehicle, component and heavy-duty aftermarket manufacturers.

Railway and rolling stock →

Suspension bumpers, rubber-to-metal mounts, tie pads and fire-retardant door/window seals for locomotives, freight wagons and transit cars.

View all industries we serve →

What buyers tell us, and what we do about it

These are the complaints we hear most from industrial buyers of rubber and silicone parts, about the industry in general. This is how we work to avoid them.

Parts that change from one batch to the next

We mix our own compounds and check dimensions against your drawing, under ISO 9001. The same recipe and the same part, order after order.

A supplier that closed or cannot keep up

Elastobras has made rubber parts in Curitiba since 1995, with 16 injection machines, 3 extrusion lines and 3 compression presses. We plan capacity with you so your line does not stop.

Cheap material that fails early

We tell you which compound goes into your part and why. It is chosen for your temperature, fluid, ozone and compression, not for the lowest price per kilo.

No traceability when something goes wrong

Each lot is identified and traced back to its compound batch and production date, so a problem in the field can be followed to its cause.

Nobody follows the development

An engineer follows your part from drawing to approved sample: design review, material proposal and dimensional report. You have one person to ask.

Mold and development cost too much

Tooling is sized to your volume: fewer cavities, simpler molds, or an extrusion die, which usually costs far less than a mold. The quote lists tooling and part price separately.

Parts that wear out or lose their elasticity

Wear and permanent set (the loss of “memory”) come from the wrong compound for the duty. We adjust rubber, hardness and section to the heat, oil, ozone and load the part really sees.

Suppliers who do not want to serve you, and hard payment terms

We answer a technical enquiry with a proposal, not a catalogue. Price, lead time and payment terms are flexible and discussed from the first quote.

What we make

Elastobras produces elastomer parts to customer drawing, in high-mix, medium-volume series. The plant runs 16 rubber and silicone injection machines, 3 extrusion lines and 3 compression presses in a 1,500 m² facility.

Most of our work is developed to customer drawing: a part starts from a drawing, a sample or a problem. For banking automation and beverage equipment we also keep a range of ATM and beverage equipment replacement parts.

Tolerances to the customer's drawing, tightest on functional dimensions. Hardness from 25 to 90 Shore A. Series run from development batches on the compression presses to continuous high-volume production on the extrusion lines.

Customers are mainly in Brazil and across Latin America. Elastobras has also shipped to customers in North America and Europe.

  • NBR
  • EPDM
  • VMQ silicone
  • SBR
  • NR
  • CR

Every new part is developed for a customer, with a dedicated tool and a compound formulated for the application.

Compounding is done in-house

Elastobras mixes its own compounds. Formulations are developed and adjusted internally against the application requirement, not selected from a supplier catalogue.

In practice this means three things. We can modify a compound when a part fails in service, instead of waiting on a raw material supplier's reformulation cycle. We control batch-to-batch consistency ourselves. And we can run a high part mix without being limited by minimum order quantities on ready-made compound.

Mixing room
Mixing equipment1 internal mixer (Banbury type) and 2 open mills
Batch sizeup to 30 kg
Batch release testingRheometer curve and hardness, on every batch
Certified scopeCompounding is inside our ISO 9001:2015 certification

Our plant in Curitiba

Front of the Elastobras plant in Curitiba, Brazil, with two open production bays and the company sign on the façade
Elastobras plant, Rua Bom Jesus de Iguape 1007, Curitiba — Brazil.

Working with international partners

Elastobras is running a modernisation programme covering process stability, automation and inspection. In 2026 the company is taking part in the IHK Exportakademie Partnering in Business with Germany programme, including three weeks in Stuttgart in October.

We are interested in technology partnerships, technical exchange with European elastomer manufacturers, and commercial cooperation for complementary products in the Brazilian and Latin American market.

Francis Brune — Partner & Managing Director · [email protected]