Curitiba · Brazil
Elastobras

Refrigeration · Assembly line accessories

Rubber leak test chambers for refrigerator assembly lines

Natural rubber chambers fitted over the brazed joints of refrigerator and freezer circuits during gas leak detection on the assembly line. Four standard models in series production, and new models developed from the joint and tube geometry on your line.

We supply appliance manufacturers and their assembly-line suppliers. Minimum order quantity on request.

Material
NR
Standard models
4
Compound
In-house
Certification
ISO 9001
Natural rubber leak test chamber fitted over a brazed copper tube joint, with a refrigerator compressor behind
Illustration of the product line.

Problems we solve

Do you recognise any of these? Most are solved with the right material, section or tooling. Tell us which one is yours and send the drawing, a sample or the part that failed.

The chamber does not fit the tube or leaves a gap

Made to your tube diameter and joint length, with the opening sized slightly larger than the tube it fits over.

The chamber wears out fast on the line

Natural rubber or another compound chosen for your test cycle and handling.

I need several sizes for different products

A family of chambers made to your drawings, with the same quality in every size.

The supplier takes forever to deliver a prototype

Sample, adjustment and series followed by the same engineer.

What we make for refrigeration lines

Standard chambers

Four models in series production, supplied in lots for line start-up and replacement.

Custom chambers

New chambers developed from the joint, the tube diameters and the access on your line, with a dedicated mold and samples for trial before series supply.

The fit decides whether the test works

Opening size

Each opening of the chamber is sized slightly larger than the tube it fits over. If an opening is smaller than the tube, the chamber does not close properly on the joint and the gas is not held — the test loses its sensitivity without anyone noticing. Each model is therefore matched to the tube diameters on the line.

Material

Natural rubber gives the chamber the flexibility to be fitted and removed by hand cycle after cycle and the resilience to return to shape between tests. Because we mix the compound ourselves, hardness is held from batch to batch, so a replacement chamber behaves like the one it replaces.

Cross-section of a rubber leak test chamber fitted over a brazed joint between two refrigeration tubes
Leak test chamber, schematic section. 1 — tube. 2 — brazed joint. 3 — natural rubber chamber. 4 — opening, sized slightly larger than the tube it fits over.

What we can develop

Chambers for other joint geometries, tube diameters and refrigerant circuits, and in other compounds where the line environment requires it. Send a sample chamber, a drawing of the joint or photos of the station with the tube diameters.

How a new part is developed: Engineering.

Standard models

Models in series production. Dimensions and tube diameters on request.

Standard models

In series production
ModelElastobras codeMaterial
F1LB1046Natural rubber (NR)
F2LB1010Natural rubber (NR)
C2LB1016Natural rubber (NR)
M1LB1080Natural rubber (NR)

Request a quotation

Please include:

  • your company and country;
  • the model, or a sample, drawing or photo with the tube diameters;
  • the quantity per order and per year.

Request a quotation →

Email a leak test chamber enquiry →

We supply companies only. Minimum order quantity on request. Enquiries go directly to one of the partners — see Company.