Curitiba · Brazil
Elastobras

Engineering · Development

Engineering and development of rubber and silicone parts

For engineers with a new part to develop, a part failing in service or an imported part to replace. We formulate the compound ourselves, build the tooling with partner toolmakers, deliver samples with a dimensional report and run series production under a frozen formulation.

We develop any rubber or silicone part that fits our machines, provided the customer invests in the tooling. Parts die-cut from sheet are outside our scope.

Injection machines
16
Extrusion lines
3
Compression presses
3
Approval
PPAP
Certification
ISO 9001
A technical drawing, a rubber part sample and an aluminium mold half on a bench, with a calliper and pencil
Illustration of the product line.

Problems we solve

Do you recognise any of these? Most are solved with the right material, section or tooling. Tell us which one is yours and send the drawing, a sample or the part that failed.

I have the idea but do not know elastomers

We help you choose material, hardness and geometry for what the part has to do.

The mold is expensive and I am afraid to get it wrong

We review the design before tooling and size the tooling to your volume, with a prototype or a simpler mold when that is enough.

Nobody follows the development

One engineer leads from drawing to approved sample, with a dimensional report you can read.

The part failed in the field and I do not know why

Send the failed part. We look at wear, permanent set and chemical attack, and propose a fix.

I need documentation and traceability

Dimensional report and PPAP when you ask for them, and lot traceability to the compound batch.

Five steps from request to series production of a custom rubber part
From request to series, schematic. 1 — your drawing, sample or failed part. 2 — design and material review. 3 — tooling and first samples. 4 — dimensional report and approval. 5 — series production.

Where a development starts

From a drawing

Geometry, tolerances and the material specification on your drawing — an ASTM D2000 callout, a customer standard or a functional requirement we turn into a compound.

From a sample

A part to reproduce, often an imported one: we measure it, propose the material and supply it from Brazil under your part number.

From a failure

A part that cracks, swells, hardens, marks or leaks in service. Most of these are compound problems, and changing the compound is something we can do in our own mixing room.

From existing tooling

Molds can often be transferred to our plant and requalified — usually faster and cheaper than starting again from a drawing.

Sectors where we develop

Railway

We already supply the railway equipment supply chain. Rubber components for rolling stock and track — including rail pads for track fastening — are developed to the operator's or the manufacturer's specification, with type tests carried out at accredited laboratories as part of the development.

Electrical

Silicone and EPDM components for electrical equipment and network hardware, developed to the utility's or the equipment manufacturer's specification, with tests at accredited laboratories as part of the development.

Mining

Extruded components and sealing and wear parts produced in continuous series for export, where dimensional consistency and batch-to-batch repeatability matter more than unit cost.

Telecom and energy enclosures

Seals, gaskets and cable-entry grommets for outdoor and buried housings — see enclosure seals.

Diaphragms and membranes

Thin silicone sections in series production, holding a membrane thickness of 0.70 mm to ±0.10 mm and sealing diameters to ±0.10 mm.

What we can develop

Any rubber or silicone part that fits our injection machines, extrusion lines or compression presses: seals, gaskets, diaphragms, bushings, mounts, rollers, profiles, tubing and parts bonded to metal or plastic inserts. Tolerances follow your drawing, tightest on the functional dimensions.

More on the plant in Capabilities and on batch control in Quality.

How a development runs

Each step is agreed before the next one starts, so tooling is only committed once geometry and material are settled.

From enquiry to series production

Development steps
StepWhat happensWhat you receive
1 · ReviewManufacturability and material reviewed against the drawing, sample or failureWritten comments before any tooling is committed
2 · CompoundElastomer family and formulation developed in-house for media, temperature, hardness, colour and loadCompound proposal
3 · ToolingMold or die built with partner toolmakers, or existing tooling transferred and requalifiedTooling quoted separately from the piece price
4 · SamplesFirst parts from the production toolDimensional report and material data
5 · ApprovalCustomer approval; type tests at an accredited laboratory where the specification requires themPPAP documentation when required
6 · SeriesProduction under a frozen formulation, with rheometer curve and hardness checked on every compound batchNo change without prior written notification

Start a development

To start we need:

  • your company and country;
  • a drawing, a sample, or a description of the failure;
  • the material specification or the service conditions — media, temperature, load;
  • the stage (prototype or series), the expected annual volume and whether PPAP is required.

Request a quotation →

Email a development enquiry →

We supply companies only. Enquiries go directly to one of the partners — see Company.