Curitiba · Brazil
Elastobras

Banking automation · Replacement parts

ATM replacement parts in rubber: rollers, belts and wheels

Rubber rollers, belts, wheels, dampers and vacuum cups for ATMs, card readers and banking printers, listed against the original part number. Molded and compounded in Curitiba, Brazil, for maintenance companies, service providers and equipment manufacturers.

We supply companies only. Minimum order quantity on request. We do not sell to end consumers.

Rubber rollers, a flat drive belt and vibration dampers in front of a cash machine mechanism
Illustration of the product line.

Problems we solve

Do you recognise any of these? Most are solved with the right material, section or tooling. Tell us which one is yours and send the drawing, a sample or the part that failed.

The ATM is down because of a worn roller, belt or pad

We make the rubber replacement parts, listed by code on this page.

The original part is expensive or slow to arrive

Replacement made in Brazil, from the Elastobras code or the original part number.

Notes jam or are picked double

Feed rollers and drive parts need the right friction. We match compound and hardness to the part you are replacing.

I cannot find the part by code

Send the original part number, a sample or a drawing. We identify it and make it.

I need stock for preventive maintenance across a fleet

Scheduled batches and staggered deliveries, agreed with you.

Rubber parts for ATMs: feed roller with rubber tyre on a hub, flat belt over two pulleys and damper pad
Typical rubber parts, schematic. A — feed roller, rubber tyre on a hub. B — flat belt over two pulleys. C — damper pad. Dimensions and hardness follow the part you are replacing.

What we make for banking automation

Note and card transport

Feed, pick and capture rollers, take-away and stripper wheels, and transport belts for cash dispensers, recyclers and card readers — the parts that wear first and cause misfeeds and jams.

Rubber on a hub or a shaft

Rollers overmolded on plastic hubs or on shafts, with bearings or bronze bushings fitted, supplied as the complete part the technician replaces rather than as a loose tyre.

Dampers, cups and stackers

Shock dampers, vacuum cups and stacker wheels for the moving modules of self-service terminals.

Banking printers

Platen and traction rollers for receipt, statement and document printers.

What we can develop

Any rubber or silicone part in the machine. Send us the worn part, or its original part number with a photo and dimensions: we build a dedicated mold, develop a compound for the duty and supply samples for your approval before series production.

In note and card transport a roller rarely fails by tearing. The surface glazes, the hardness drifts and the diameter shrinks, and the machine starts to misfeed well before the part looks worn — how long that takes is decided by the compound. Because we mix our own compounds, hardness and grip are held from batch to batch: the rheometer curve and hardness of every compound batch are checked before it reaches the press, and once a reference is approved its formulation is frozen.

Some of these machines also use suction cups — see vacuum suction cups. How a new part is developed: Capabilities.

Parts we already supply

Search this page for the original part number (Ctrl+F / ⌘F). Brand names and part numbers are used for reference only, to identify the equipment each part fits; Elastobras is not affiliated with these manufacturers and the parts are not original manufacturer parts.

Perto

Fits Perto equipment
PartOriginal P/NElastobras codeOriginal reference
Roller140.10.526-1AB5015—
Damper260.54.014-0AB5010—
Damper260.54.003-3AB5011—
Damper260.54.008-4AB5012—

Diebold

Fits Diebold equipment
PartOriginal P/NElastobras codeOriginal reference
Picker module belt, centre rib49-008728AB5019Belt, Center Rib
Stacker module belt, flat, centre rib49-008728-000BAB5020Belt, FLT, 0.501, w/ Center Rib
Stacker paddle wheel (plastic)29-008419-000CAB5018Long Paddle Wheel
Feed shaft assembly49-009303-000AAB5021Feed Shaft ASM MMD
Feed shaft assembly, new model49-009303-000EAB5022Feed Shaft
Stripper fender, early model39-008756-000AAB5016Fender Stripper
Stripper fender, wide (new model)49-016962-000DAB5017Wide Fender
Stripper wheel, early model39-005631-000CAB5025Snap On Wheel, Stripper
Stripper wheel, wide (new model)49-016968-000FAB5024Wide Stripper Wheel
Take-away wheel, overmolded39-011885-000AAB5026Wheel, Snap-On, Overmolded
Take-away wheel, red (new model)49-016971-000DAB5018Red Take Away Wheel
LCM lower roller89-029878-000AAB5027Roller, Pad
LCM upper roller, large, with bronze bushing89-029875-000AAB5028Roller
Feed roller 16.2 × 5 mm89-029879-000AAB5116Feed Roller

NCR

Fits NCR equipment
PartOriginal P/NElastobras codeOriginal reference
Vacuum cup2770009574—Vacuum Cups
Capture roller, 58xx (wide)998-0235885AB5037Capture Roll for 58XX (Wide)
Feed roller, thin—AB5031Feed Roller Thin C3

Wincor Nixdorf

Fits Wincor Nixdorf equipment
PartOriginal P/NElastobras codeOriginal reference
Rubber roller for draw-off shaft, CMD V48046900720AB5014Rubber Roller Only for Draw-Off Shaft CMD V4
Pick-up roller, CMD V41750035778AB5005DR Roller Shaft CMD V4
Roller—AB5117Roller MCT345
Card reader roller 17.1 mm, with bearingsCRD ID18_06AB5104Roll for ID18
Card reader roller 16.1 × 38 mmCRD ID18S01_03AB5107Roll for ID18 S01
Card reader roller 16 × 38.9 mmCRD ID18051_02AB5114Roll for ID18 051
Card reader roller 16.1 × 30.15 mmCRD ID18S01_02AB5110Roll for ID18 S01
Card reader roller 16.1 × 86.6 mmCRD ID18S01_04AB5111Roll for ID18 S01
Card reader roller 13.2 × 10.3 mmCRD ID18_05AB5112Roll for ID18
Card reader roller 16.9 × 14.4 mmCRD ID18051_03AB5115Roll for ID18 051 (3S4YR-MVFW1JD)
Card reader roller 16.1 × 43.1 mm3976742-7AB5105Shaft Assy, Roller (d) for 3S4YR-MVF
Card reader roller 16.1 × 24.7 mmCRD ID18S01_01AB5109Roll for ID18 S01
Card reader roller 15.8 × 15 mmCRD ID18051_01AB5108Roll for ID18 051
Card reader roller 16.1 × 66.8 mmCRD ID18051_04AB5113Roll for ID18 051

Sankyo

Fits Sankyo equipment
PartOriginal P/NElastobras codeOriginal reference
Card reader feed roller, large998-0235227AB5023Card Reader Roll Large
Capture roller, card reader ICT3Q8MRG377801AB5037Capture Roll R/W ICT3Q8-2R1A0340
Roller 20 × 10 mm, card reader ICT3Q8MRG421501 · 19-040624-000AAB5080Roll R/W ICT3Q8-2R1A0340

De La Rue

Fits De La Rue equipment
PartOriginal P/NElastobras codeOriginal reference
Endless transport belt923.021.831.009AB5004Belt Transport

Bematech

Fits Bematech equipment
PartOriginal P/NElastobras codeOriginal reference
Platen roller—AB5083—
Roller—AB5084—

Pentasis

Fits Pentasis equipment
PartOriginal P/NElastobras codeOriginal reference
Motor shaft—AB5138—

Lexmark

Fits Lexmark equipment
PartOriginal P/NElastobras codeOriginal reference
Traction roller, E322 / E32312G4483 · 374320132LB00AB5033—
Exit roller12G4493AB5034Roller Exit

Other equipment

Other banking equipment
PartOriginal P/NElastobras codeOriginal reference
Envelope traction belt, small4640271BE7046—
Envelope traction belt, large4640272BE7047—
Roller—AB5142—

Request a quotation

Please include:

  • your company and country;
  • the Elastobras code or the original part number;
  • the quantity you expect to buy per order and per year.

Request a quotation →

Email an ATM parts enquiry →

We supply companies only. Minimum order quantity on request. Enquiries go directly to one of the partners — see Company.