Keep water out
The bush is the barrier at the open end. If it lets moisture in, the device is compromised before it is ever used.
Components for the explosives industry · Closure bushes
Thin-wall rubber bushes that close and seal the open end of a detonator or initiation device, made by extruding the tube and cutting it to length. We mix the compound ourselves, freeze the formulation and keep every lot traceable.
We supply manufacturers of detonators and initiation systems, and their component buyers. Companies only.
The bush is the barrier at the open end. If it lets moisture in, the device is compromised before it is ever used.
In many applications the bush sits in contact with oils, greases or fuels. The compound is chosen and tested for the fluid it will actually meet.
Stored hot, stored cold or used at either end, the bush must keep sealing. The compound is selected for your range, not for a catalogue average.
Automated assembly needs every bush to behave the same. A bush that varies in wall or has a rough cut face jams the line or seals badly.
A thin-wall bush with an uneven wall seals unevenly. Concentricity of the wall comes from the extrusion die and from controlling the process, and we check it on samples of each lot.
Cutting the extruded tube to length can leave a burr, whisker or sliver on the cut face. On a part that is pushed on by machine, that is enough to cause a jam or a poor seal. Cut quality is part of the specification, not an afterthought.
Once your bush is approved, the formulation is frozen. We do not change the compound, the supplier of a raw material or the process without telling you first, and every lot can be traced to the batch of compound it was made from.
If you already buy this bush and want a second supplier, send the drawing, a sample and the current specification. We will say what we can match, develop the extrusion die and the compound, and send samples for your approval before any series supply.
Tooling is charged separately. Price, lead time and payment terms are flexible and discussed from the first quote. Supply is from Curitiba, Brazil, with an engineer following the project from sample to series.
How a new part is developed: Engineering. Our quality system is ISO 9001 certified.
Sales of these components are subject to verification of the buyer and the destination, and to the export-control and sanctions rules that apply.
Please include:
We supply companies only. Enquiries go directly to one of the partners.